Nitrous line

[GarrettGTX]

Can you use steel brake line for nitrous feed?? i have heard of this but is this safe and okay to use??

[OffShore]

Can you use steel brake line for nitrous feed?? i have heard of this but is this safe and okay to use??

I have an extra 4an in 16ft

[GarrettGTX]

I have an extra 4an in 16ft

well i guess i was more talking about from the solnoid to the nitrous plate... does that sound like something anyone has heard of?

[Akromix]

That will work fine

[OffShore]

well i guess i was more talking about from the solnoid to the nitrous plate... does that sound like something anyone has heard of?

I dont see why not, the fogger setups I assume are set up that way

[RustyLX]

R u still using the NX plate kit you had before.
If so I would think twice about the hard line. Its a big enough pain in the ass to swap jets with the braided line. I could only imagine with hard line.

[64fairlane]

i have hard line on my plate and its not hard at all to change jets

[SicLinc98]

Yes it is fine, I have read many times thats what to use.

Or else heres SS

http://www.nitrousoutlet.com/catalog/models.asp?group=27&model=99&dept=11

Then the Nuts

http://www.nitrousoutlet.com/catalog/models.asp?group=27&model=96&dept=11

[orange88]

Ive did it a bunch of times

[GarrettGTX]

yeah i am still using the plate setup i know how hard it is to swap jets... ugh.. lol

[RustyLX]

i have hard line on my plate and its not hard at all to change jets

I was talking about a trickflow plate kit. The jets are in the back pretty much up against the firewall. One points to the side the other points up. Its just very tricky to get the lines back on. Really tough on a hot motor.

[64fairlane]

I was talking about a trickflow plate kit. The jets are in the back pretty much up against the firewall. One points to the side the other points up. Its just very tricky to get the lines back on. Really tough on a hot motor.

i got ya