Help

[-D]

having problems with hooking up stock temp sender. gauge will not read. tried getting a resistance reading between sensor and wire, didnt get anything. had autometer gauge hooked up, dont want it anymore, wanna go back to stock gauge, i did change the sender from autometer, to stock. whats going on? any help would be appreicated

Dustin

[Macs Stang]

dustin, your stock sender is probably bad.

[-D]

sensor is brand new

[Macs Stang]

hmm, possibly faulty sender then? or maybe your gauge has a short in it somewhere that isn't allowing it to read from the sender. who knows. i just put my new gauges on and i couldn't be any happier, they are awesome compared to stock.

[Agent91]

Take the sensor out and check the resistance, then warm it up in hot water and check it again...

[mnstang]

just touch the end of the wire going to the sensor to ground. if it pegs the gauge you have a sensor problem. if not, look at your wiring and/or gauge.