best torque converter for a street driven fox aod stang

[tuminatr]

So what do you thin is the best way to go on a street driven mustang it has a b&m shift kit and a external cooler
I am looking to have it rev up a little bit before each shift
car has 3.55 rear gears and is stock right not but will be around 350hp before the end of summer

[james]

Hughes vary good Torque mulit

[octanehuffer]

2400 stall with 3.73 gears. 2000-2200 stall with less than 3.55. Stock is 1800 IIRC

[Slow35th]

Hughes vary good Torque mulit

Hwhat did you say

[james]

what u do is trick your computer to thing its at a high speed or something and put it to WOT in 3rd-4th with stock shoud b like 2000 rpm and winever you start to make power get a converter thats around that RPM prob a lil lower if you have 350-400hp becase you will most likely over stall the converter (if its cheap) but huges has a vary good Torque multi ( some cheap 1s feel like you r just sliping a cluch)

[tuminatr]

sweet

so a huges with around 2000-2200 stall for my 3.55 rear gears. thanks

[RegalX]

Edge Racing Converters.

http://www.edgeracingconverters.com/