Cleaning Edelbrock Performer RPM II

[robl110]

I am looking at picking up a used Edelbrock Performer RPM II intake. Can anyone tell me if my BBK 70mm TB will work with this intake. Looks like Edelbrock’s sight recommends there 70mm TB so I would assume a BBK one would mount up fine

EDIT: Picked up the intake this morning . Does anyone have suggestions on the best way to clean up a used intake? Simple green and a brush? Any does and don't when dealing with cleaning an intake?

EDIT#2: Please see pics on page 2. Thanks!

[87project]

I just came from there and that intake is fricken sweet. and yes your BBK will bolt right on. May or may not want one of those TB spacers, up to you. I think he has one forsale as well. Asking about your LX, right?

[robl110]

I just came from there and that intake is fricken sweet. and yes your BBK will bolt right on. May or may not want one of those TB spacers, up to you. I think he has one forsale as well. Asking about your LX, right?

Yes the lx. Going to pick it up in the morning

[robl110]

Picked up the intake this morning. Does anyone have suggestions on the best way to clean up a used intake? Simple green and a brush? Any does and don't when dealing with cleaning an intake?

[bluchev]

just get some good degreaser and a stiff brush, hot water helps too.

[octanehuffer]

Just don't use anything that will dissolve aluminum.

[5.0stang85]

Picked up the intake this morning. Does anyone have suggestions on the best way to clean up a used intake? Simple green and a brush? Any does and don't when dealing with cleaning an intake?

sand blast then powder coat clear...

[shagwag]

Easy off oven cleaner

[MINNESOTA 5.0]

Picked up the intake this morning. Does anyone have suggestions on the best way to clean up a used intake? Simple green and a brush? Any does and don't when dealing with cleaning an intake?

I CAN SANDBLAST IT FOR YA IF YA WANT.

[robl110]

sand blast then powder coat clear...

That's probably the way I will go.

Anyone have recommendations on good power coat shop in the TC area? I would like to have it powder coated black.

[robl110]

I CAN SANDBLAST IT FOR YA IF YA WANT.

Thanks! I will let you know if I end up needing your services.

[RNSF]

I CAN SANDBLAST IT FOR YA IF YA WANT.

you did a nice job on my lower still cant figure out why you never did the upper though, not that it matters.

[5.0stang85]

That's probably the way I will go.

Anyone have recommendations on good power coat shop in the TC area? I would like to have it powder coated black.

cooter's coating! good guy no dicking around!

http://cooterscoating.com/

[jp67stang]

if you have a selfwash car wash by ur house just go use that. thats what i do i bring soap or oven off and brush myself.

[robl110]

cooter's coating! good guy no dicking around!

http://cooterscoating.com/

I will give him a call tomorrow. Thanks.