my little project this year. gianormous pictures inside.

[Mullet Tuner]

whya that? i already bought the weld in ones. what are yours? know a way to line the damn things up and weld them without putting it in the car and connecting everything?

I hated how the torque arm mounts to the 9". IMO, it puts a constant lateral load on suspension parts (tires included) that typically won't see them while driving straight with a factory rear or 12 bolt.

As for the brackets, theoretically, you could calculate the sweep angle of the arc that the lower control arms would make at a chosen angle. But, I definitely wouldn't chance it. You want the car at ride height when the brackets are welded in.

[01darkblueTA]

i know what you were referring to philis. but my trans wont break for a couple more years so i think you're wrong.

[01darkblueTA]

at ride height with lowered springs correct? it shouldnt be a big deal if i run stock springs at the track will it?

[Paul Revere]

JUNK

[SFC]

Don't take off the bumper cover, you'll never get it lined back up!

[01darkblueTA]

[bluchev]

i found out i have to have the rear end mounted in the car and preloaded in order to weld those lca relocation brackets in

That's funny, my 9" rear end came with the adjustable lower brackets already installed.


Looks pimp though.

hey before you get the rear coated, weld on a couple of tabs to hold down the brake line- i completely forgot to

[Paul Revere]

That's funny, my 9" rear end came with the adjustable lower brackets already installed.


Looks pimp though.

hey before you get the rear coated, weld on a couple of tabs to hold down the brake line- i completely forgot to

Good tip

[Mrs. 2Lehner]

Don't forget to get new tabs

[01darkblueTA]

Don't forget to get new tabs

i don't know what you're talking about

[01darkblueTA]

Good tip

.....

[The Russinator]

[The Russinator]

[TitaniumGT]

Siiick, thanks Russ. How much was the paint? and wheres the clutch?

[01darkblueTA]

thanks russ i was in the middle of resizing them now lol.
little over 300 for bumper and headlight covers.