Procharger Install movie.

[forgotn]

http://www.youtube.com/watch?v=TC63I-v8PII

316 RWHP 347 FPT

[Mullet Tuner]

What a turd.

[Scotty07]

I want my 5:20 back.

[YFZ4FITTY]

[forgotn]

Man you guys are brutal!!

[SFC]

welcome to tcstangs. I hope that 316 is before the supercharger...

[forgotn]

Dude!! Stock intake & heads, stock bottom & a freekin' AOD. Heads and intake are my spring project along with a possible T-5 swap.

[LES]

Nice choice of blower, now shore up the rest of the motor over the winter. That thing with good heads,cam intake could make 400plus RWHP .

[Macs Stang]

Cool. Blowers are fun. Just wait to you really start pumping some air through the chambers.

Which Procharger did you go with?

[I Tried]

Nice choice of blower, now shore up the rest of the motor over the winter. That thing with good heads,cam intake could make 400plus RWHP .

Almost to stock 2V with blower power then.

I am not hating your car Nice #'s for a stock motor low boost!

[forgotn]

The car started with 185 RWHP so I'm mildly happy with 316 rwhp at this moment.

[Macs Stang]

The car started with 185 RWHP so I'm mildly happy with 316 rwhp at this moment.

Pulley it up!

TRDon is running a NOVI 2000 through a TKO 600 and making 360/370 to the tires. He is basically stock besides the intake...

What psi of boost are you running?

You are going to be down on power with an AOD versus a t-5 so don't worry to much about the numbers...

[forgotn]

I'm making 9 Pounds at 5300 Rpm. 3.85" pulley at the moment.

[Macs Stang]

I'm making 9 Pounds at 5300 Rpm. 3.85" pulley at the moment.

That is really not that bad. Especially for stock everything, except for exhaust. That is a monsterous pulley. If you feel like it pulley it down to a 3.50" or whatever is available to make around 12-13psi or so.

[forgotn]

Thinking about it but I'm going to get the heads and intake first make it breathe better that way first then go down a couple pully sizes.