(PIX) So the Mustang broke down today

[Notch]

I was driving home from work and I turned onto hwy 5 to get to 694, and I went to shift into 3rd and all of a sudden there is very little clutch feel and the clutch wouldn't dissengage. so i pull over, shut it off, and put it in neutral and push it into holiday. after seeing the fork was still moving and that wasn't the problem, and my cell being dead, I put it into 1st gear and started it in 1st and drove it 2 miles back to work in first gear in the shoulder. I put it on the lift at work and see that the metal ring on the pressure plate pulled off and was spinning freely and lodged itself between the throwout bearing and pressure plate fingers. So now I get to pull my tranny out and put a new clutch in (its a junky clutch in there that was just supposed to last a little while, but i thought i'd be more than 3 days) But i'm not pissed or anything, because i've already put a tranny in once, and it gets easier the second time, right

anyways, thats my story. the end

[KrisR]

Where do you work? I work near there also.

[Notch]

EZ Riding RV Center 36 and McKnight

[CAMSS30]

It's always easier the second or third and sometimes 4th time around.

[kineda]

ah its always fun to re-experience just how heavy these fucking mustangs are when you have to push it by yourself. sorry to hear that man...

[RyanM]

its just a small bug ,we all have them after a major project

[Macs Stang]

EZ Riding RV Center 36 and McKnight

Thats right by my house.

[sc0tty8]

Time to upgrade already?

You'll know that car like the back of your hand in no time, inside and out.

I remember one time, I got pulled over, for driving on the shoulder The car was pinging sooo bad

[2 beer]

I live close by too

[ejholmgren]

maybe you guys should have a sleep over?

[2 beer]

maybe you guys should have a sleep over?

Take your homosexual undertones elsewhere.

[sc0tty8]

Take your homosexual undertones elsewhere.

Thats not what I heard you saying last night

[Notch]

its just a small bug ,we all have them after a major project

yup. i was actually suprised how well it worked before that for something thrown together in my garage by myself and myself only. But i'm most likely gonna swap clutches at work which means 4 post lift and hydralic tranny jack

[Killer Capri]

do you need a pressure plate cause i happen to have one............................................... .................................................. .....................................for free

[Fosters]

ah its always fun to re-experience just how heavy these fucking mustangs are when you have to push it by yourself. sorry to hear that man...

the worst part is, ever since i got c clip eliminators, it feels like i have the hand brake on a notch or two... I can't even push start it anymore... by the time i get in the car the thing stops