Power estimate for this 302

[fusion_ta66]

My buddy is thinking of buying this 302 motor. This is the list of specs, all I have. Any estimates of power? I'm not well versed on this subject.

Holley single plane intake
Anderson Ford n-51 cam
Edelbrock performer aluminum heads
Dominator carb
MSD distributor
Meziere electric water pump
Bored 0.030 over

[Mustangmatt]

way mismatched combo... why a dominator carb??? 325-350hp at the crank...

[mnstang]

I'm going to say 310 wheel HP

[289Notch]

Ya, totally mismatched. I'd be weary.

That setup needs a 600 cfm carb. I'd say it would make 340 at the crank if it was tuned right and had the best carb.
that cam with TW heads can make 360 hp on a 5.0

[forgotn]

way mismatched combo... why a dominator carb??? 325-350hp at the crank...

^^ THIS ^^

[Hack]

220-275 HP at the crank is my estimate, but you need to know something about the short block in order to be sure. Compression ratio will make a difference, as will miles on the combination. Those Edelbroke heads aren't much better than E7s.

[Meegs]

I'm going to say 310 wheel HP

I must have missed the 150 shot of nawz then

[Stormwalker]

220-275 HP at the crank is my estimate, but you need to know something about the short block in order to be sure. Compression ratio will make a difference, as will miles on the combination. Those Edelbroke heads aren't much better than E7s.

Finally, a realistic estimate.

[Biff Tannen]

Finally, a realistic estimate.