Tweet
My dad is horrible at using the internet, so i told him i would list some stuff for him on here.
351w billet distributor, think its an accel due to the poop brown cap and rotor. we bought it from a guy that ran it dyno time only. He thought he had a bad dist. turns out it wasn't bad. It looks like new $100
Universal aluminum radiator, 2 row, 31" wide, not sure how tall, was going into a maverick and was used for mach up only, never filled with coolant. $200
Set of used Weld Pro-star skinnies, with some OK tires, wheels and tires are used, would polish up very nicely. $250 (Ford bolt pattern 5X4.5)
15x14", 3.5" back spacing, 5x4.5 bolt pattern with 29x18.5" Hoosier quick times. Come with center caps, normally cost 1258 with out shipping on summit. They are bolted to the narrow housing for mach up only. $1000
15x3.5", 5x4.5 bolt pattern with new 165/80r15 metric tires, also with center caps, cost 191 new each for just the wheels, Pro stars that match the wheels above $400
All 4 wheels and tires have 0 miles on them, and were only used for mach-up purposes. Sold project, no longer need these wheels and tires. If you want the set of 4 $1350
If there is interest in the Narrow 9" housing, i'll measure how wide it is flange to flange and how wide it is perch to perch, and i'll get a price on it.
31 Spline spool (I'll double check) $25
9" Carrier with 28 spline spool installed. $65
Billet metering blocks $75
3/8 rocker arm stud girdles w/ extended poly locks, looks like someone has clearanced the ends to make them fit under the valve covers a little better (SBF)$75
Mallory Dist. For a 429/460, belive it to be model #3756701 will double check if there is interest. $200
351w billet distributor, think its an accel due to the poop brown cap and rotor. we bought it from a guy that ran it dyno time only. He thought he had a bad dist. turns out it wasn't bad. It looks like new $100
Universal aluminum radiator, 2 row, 31" wide, not sure how tall, was going into a maverick and was used for mach up only, never filled with coolant. $200
Set of used Weld Pro-star skinnies, with some OK tires, wheels and tires are used, would polish up very nicely. $250 (Ford bolt pattern 5X4.5)
15x14", 3.5" back spacing, 5x4.5 bolt pattern with 29x18.5" Hoosier quick times. Come with center caps, normally cost 1258 with out shipping on summit. They are bolted to the narrow housing for mach up only. $1000
15x3.5", 5x4.5 bolt pattern with new 165/80r15 metric tires, also with center caps, cost 191 new each for just the wheels, Pro stars that match the wheels above $400
All 4 wheels and tires have 0 miles on them, and were only used for mach-up purposes. Sold project, no longer need these wheels and tires. If you want the set of 4 $1350
If there is interest in the Narrow 9" housing, i'll measure how wide it is flange to flange and how wide it is perch to perch, and i'll get a price on it.
31 Spline spool (I'll double check) $25
9" Carrier with 28 spline spool installed. $65
Billet metering blocks $75
3/8 rocker arm stud girdles w/ extended poly locks, looks like someone has clearanced the ends to make them fit under the valve covers a little better (SBF)$75
Mallory Dist. For a 429/460, belive it to be model #3756701 will double check if there is interest. $200
Comment