Tweet
out of a 93 4cyl coupe 5spd come take it....its taking up too much room and i have no use for it...comes w/ shocks parking brake cables, but no brake lines.
-
-
come on its free -
freeComment
-
i am sure LTDpower would want this.
O.C.R.
I make horse powerzComment
-
I wonder if will be needing a 2nd Rear end for my 02' Ranger...Originally posted by 93stang351w
Hmmmm....Comment
-
yea you will...so you should take itComment
-
PM sometime and i'll pick it up saturday if thats cool..Comment
-
I have a 95 ranger with a 4 cylinder, will it work on that? what gear ratio is it?1967 Coupe 289 bored .060"
Wimbledon white w/black landau top
C-4 AutomaticComment
-
Um... guys... you'll have to weld pads on to the rear-end to make it mount to the leaf spring suspension... swap out your axels for the ranger axels, and brake hardware...
But if you don't mind making the pads... by all means.
-Duck1992 Mazda MX3: L3 100 BigYmp.Comment
-
Could I just use the third member?Originally posted by theduckylittle1967 Coupe 289 bored .060"
Wimbledon white w/black landau top
C-4 AutomaticComment
-
It won't just "bolt on" you'll have to do welding. The internals are the same, the housing just has different mounting hardware on it.
-Duck1992 Mazda MX3: L3 100 BigYmp.Comment
-
That ranger should have an 8.8 rearend in it.
Do not waste your time putting that in.Originally posted by Slow35thComment
-
Not all rangers have 8.8's... especialyl the older ones.
-Duck1992 Mazda MX3: L3 100 BigYmp.Comment
-
The axles sitting my garage, my truck has a 7.5, the 4X4 and anything that came with a towing package came with an 8.8.Comment
-
sorry didnt read the 4cyl. part. any ranger with a 4.0 for 1990 up have 8.8's so you may or may not want itOriginally posted by Slow35thComment
Comment