408 Windsor($2250) and ported TFS heads($1200)

[MadMatt]

408 DSS 351 block. Bored .30 over.
Mechanical cam. The cams specs are 290/290, 250/254 at 0.050 lift, .560 lift intake/.564 lift exhaust. 108 lobe centerline
ARP 351 main stud kit.
ARP oil pump shaft
Probe 4.030 19cc pistons. 440 grams
RPM 408 custom ground crank shaft 4" stroke. 2.100" journal
RPM 6.125 H beam rods
Moly standard tension rings
Fully balanced at 28oz
Fress motor. Never fired. 1750$

TFS heads, 64cc chambers, 5 angle valve job, new guides, TFS pushrods, 172 FMS roller rockers 850$
Its gotta go because I think the shit is going to hit the fan for me at work!Matt - 651-336-3587

[kineda]

you might want to put the price on the motor up? Unless you meant you will sell it all of a couple of hundred less than the $1200 for the heads

[MadMatt]

Thank you.

[MadMatt]

TTT

[CAMSS30]

There ya go LTD.

[MadMatt]

Its a gooooood deal. I want a new TV and have decided on yet another direction for the car

[Drunko McMoppo]

There ya go LTD.

I never said I was looking for a 408, that was all you guys telling me I should get one.

But info on heads? I may be into those.

[MadMatt]

Sorry, forgot to edit out the heads.

[Drunko McMoppo]

No dice.

[MadMatt]

Heads are available to ltd for a Mark 8 and payment plan.

[2BAD]

What TV are you lookin at? I could probably just get the TV for you and we'll work a trade...hmm...408 might be fun??

[LES]

Matt are the pistons -19CC dished? Was this to be a boosted Application??


OR Domed High Compression NA application?

[Old Man]

Matt are the pistons -19CC dished? Was this to be a boosted Application??


OR Domed High Compression NA application?

They would have to be dish, a 19cc dome would be over 18:1 compression.

A -19 dish would be around 11:1

[LES]

They would have to be dish, a 19cc dome would be over 18:1 compression.

A -19 dish would be around 11:1

I kinda figured that. And a Minus -19 with a 61CC head is more like 9-1 isnt it Gary??

[Old Man]

I kinda figured that. And a Minus -19 with a 61CC head is more like 9-1 isnt it Gary??

Not with a 4" stroke it is 11.5:1.

With a 3.25 stroke its around 9:1.