WTB heads, cam

[5SpeedFox]

Looking for a pair of assembled 302 heads for around $1000 or under. I would Like AFR or Trick Flow but i'm open to others. I want to be over 300WHP With an e-303 and tf street heat intake so they need to be pretty good.

Lookin for an e-303 or something around that, that is a good all around cam for like 1500-6k rpm range.

24lb injectors and the maf thats calibrated for them

65 or 70mm Tb as well

1.6 Roller rockers

pretty much wanna do a cheapER version on a top end kit here. any advice and stupid comments are welcome as well

[Outlaw86'd]

stupid comments are welcome as well

NAWZ!

[engnerdan]

If your looking for a 65MM throttle body I have one with EGR spacer for $100, its a FMS unit and is in almost new condition, it also comes with the egr valve and TPS sensor (new).

http://www.tcstangs.com/forum/showthread.php?t=58906

[Joe M]

Looking for a pair of assembled 302 heads for around $1000 or under. I would Like AFR or Trick Flow but i'm open to others. I want to be over 300WHP With an e-303 and tf street heat intake so they need to be pretty good.

Lookin for an e-303 or something around that, that is a good all around cam for like 1500-6k rpm range.

24lb injectors and the maf thats calibrated for them

65 or 70mm Tb as well

1.6 Roller rockers

pretty much wanna do a cheapER version on a top end kit here. any advice and stupid comments are welcome as well

Buy Kyle K's (Blackstang 5.0) Short Block. Made 265 RWHP through an auto.
Hes really only asking what the heads are worth (Gt40's)

[5SpeedFox]

Buy Kyle K's (Blackstang 5.0) Short Block. Made 265 RWHP through an auto.
Hes really only asking what the heads are worth (Gt40's)

I think i've already talked to hom about it.

[closmosis]

pm sent

[5SpeedFox]

pm'd back

[5SpeedFox]

BTW fellas would track heat heads be ok with a street intake and a e-cam or stage 1 cam?

[MadMatt]

stage 1

[5SpeedFox]

stage 1

so it don't really matter if they are Track Heat heads?

[kineda]

there is like a bizillion people selling tfs stage 1 cams and e303 cams on here right now.

[5SpeedFox]

Looking for a pair of assembled 302 heads for around $1000 or under. I would Like AFR or Trick Flow but i'm open to others. I want to be over 300WHP With an e-303 and tf street heat intake so they need to be pretty good. Pending

Lookin for an e-303 or something around that, that is a good all around cam for like 1500-6k rpm range. Still need

24lb injectors and the maf thats calibrated for them Pending

65 or 70mm Tb as well Pending

1.6 Roller rockers Still need

Valve covers, ARP head bolts Still need

BUMP!

[KickAssFlash]

My TFS stage 1 cam is for sale. It has less than 300 miles on it...the lobe seperation causes vacuum problems on 94-95's so I cannot use it. $100 and its yours.

[Stormwalker]

^ His TFS1 has very little use, and was used with brand new lifters. If you're going to buy a used cam, that's the one to go with.

[5SpeedFox]

pm sent