F/S: PERFORMER 5.0/5.8L WITH 2.02" INTAKE VALVES

[Spiral]

I have a set of Edelbrock Performer cylinder heads that were ported by Dan (TurboX2 on here). I previous purchased them from Chris Cabe for a project I was working on but the project fell through. I am looking to get $400 for them, they include valves but no springs, clips or retainers. They have 2.02" Intake valves and 1.60" exhaust valves. Extra material was welded on to allow for the porting, I do not have any flow numbers for them but maybe Chris or Dan does?

$400 FIRM unless otherwise noted!

[prostang92]

dang, how did you end up with them?? I SOLD THEM TO SOMEONE ELSE???

cc

[Spiral]

dang, how did you end up with them?? I SOLD THEM TO SOMEONE ELSE???

cc

Wanna buy them, Im very close to the guy you sold them too.

[SmithEvo]

what happened to the springs/clips/retainers?

[Spiral]

what happened to the springs/clips/retainers?

someone stole them, but hell, you'd proably need to get a spring for your application anyways.

[andysutt]

I know this is my first post here, but a friend from the Maverick/Comet Board linked me here... Im interested in the heads..

How much to ship to Conway AR 72034?

[Spiral]

UPS ground would be about $35

[andysutt]

Do you have pictures of where it was welded up?

my email is my username here @conwaycorp.net

[Spiral]

one moment....

[Spiral]

[andysutt]

Just out of curiosity why were they welded up?? I've never heard of them being welded up to be ported...

Also, seems they have changed hands a few times lately... am i missing a flaw in them somewhere other than the welds?

[andysutt]

Can you post picture of the ports so i can see what the welds look like in there?

[Spiral]

they were welded so extra material could be taken out while porting, My cousin Frankenstein bought them from Chris (prostang92) for his car but he didnt have the money to jump into the project, he needed money so I bought them from him to sell... Like a loan with the heads being calateral.

[Old Man]

You have a PM

[andysutt]

Im interested still, upon seeing port pictures.

I've never heard of having to weld these up to get them ported really big. But if pics look ok, I may make the purchase.