Might be looking for a larger Roller Cam.

[Joe M]

Any one have larger than stock? (88 HO motor) Possibly looking for a larger lift i think i can go as high as .550 with the current heads, but im not 100% on that, So im thinking around 512 or so

[worduphomefry]

i gots a b cam

[Joe M]

Is it a Roller cam though? I think theres a difference in a Roller cam, and a hydrolic flat tappet cam isnt there?

[worduphomefry]

yes there is but it's not a flat tappet cam. it's in the 5.0 HO motor i gave stormwalker

[Joe M]

Lol if its in the motor....


Any how much HP gain is likely to be seen? ive already got built up heads fomr an 85 HO

[Joe M]

Oh and a Bran new Stock replacement cam came with the motor tonight( btw, thanks for the helluva deal 88stang, if you need something i have let me know!)

[worduphomefry]

well he's going to run a trick flow cam so when he does the switch (which should be soon) he will give the cam back to me. http://www.fordracingparts.com/parts...rtKeyField=899

[Joe M]

Hrmm looking at that, i may wanna go with an E cam..

[Joe M]

* Fair idle quality. Good low-end torque. Significant top-end horsepower above 4000 RPM. 5-speed manual transmission recommended. (3)


ive got a 3 speed auto matic C-6 Tranny.

[Joe M]

How much you think you will want for it?

[worduphomefry]

when i see it i'll know but i guess around $50

[Joe M]

Hae it cleaned and have it checked first.... 40$

[worduphomefry]

ran fine when it was running, i'll let you know when i get it