Tweet
Corbeau CR1 Race Seats w/4-point harnesses, sliders, lumbar, Fbody brackets
OK, I realize this is a Stang site and these have the F-body brackets, but with Stang brackets these will work in your cars too....
I hate to do this, but I need the money for other things right now (just poured a G into the trans in the Z28, need a 9", tires, and a clutch for the GTA, etc.). So my seats are up for sale. Some of you may have seen the passenger one in my car a while back. I had the driver side one installed as well but the way the bracket was set up I would not have been able to wear a helmet so I removed it and planned on fabbing up my own seat bracket (I'm 6'2" for those that don't know me).
I bought these used off of a guy I know from the www.thirdgen.org site. They were essentially new when I got them from him (he switched to Recaros) and only the driver seat showed a small amount of wear from getting in and out of the car on the leather patches. I basically have done nothing more than install them (and immediately remove the driver side one....lol). There is a very small nick in the leather part of the top of the driver side seat that happened in shipping when I got them but it is extremely hard to notice and probably wouldn't be difficult to repair. Otherwise they are in great condition.
Here is a description of the seats:
These are the Wide model seats.
They also have the inflatable lumbar support in both seats.
They come with the brackets that will work in a 3rd or 4th generation Fbody and 4 point Corbeau harnesses with a quick release buckle. These were in a 3rd gen car before I got them and I only tried them in my GTA but as most of you know, 3rd and 4th generation seats are interchangeable (I had/have 97 Z28 seats in my GTA) so these can be used in either model Fbody.
New, these seats list anywhere from $840-1050 for just the pair of seats. The brackets ($60x2), harnesses ($70x2), and inflatable lumbar support ($50x2) options would bring the total to well over $1200.
Here is a picture of what they look like:
Here is what the harnesses look like:
Pricing:
------------------------------------------------------
I paid $800 plus shipping for the seats this winter and, taking into account the nick in the passenger seat and I need them gone like NOW, I want $700 for everything! If you have a Stang I will take $30 off for the Fbody brackets and sell them seperately. I will entertain reasonable offers/trades...
I hate to do this, but I need the money for other things right now (just poured a G into the trans in the Z28, need a 9", tires, and a clutch for the GTA, etc.). So my seats are up for sale. Some of you may have seen the passenger one in my car a while back. I had the driver side one installed as well but the way the bracket was set up I would not have been able to wear a helmet so I removed it and planned on fabbing up my own seat bracket (I'm 6'2" for those that don't know me).
I bought these used off of a guy I know from the www.thirdgen.org site. They were essentially new when I got them from him (he switched to Recaros) and only the driver seat showed a small amount of wear from getting in and out of the car on the leather patches. I basically have done nothing more than install them (and immediately remove the driver side one....lol). There is a very small nick in the leather part of the top of the driver side seat that happened in shipping when I got them but it is extremely hard to notice and probably wouldn't be difficult to repair. Otherwise they are in great condition.
Here is a description of the seats:
The CR1 provides drivers of all kinds with the latest in looks, comfort, durability and style. The CR1 is the seat everyone has been looking for. Features a fully adjustable seat back with a flip forward fingertip controlled lever for rear access.
High-Density Injection-Molded Foam
Ergonomically Design
Harness Belt Capability
Integrated Shoulder, Kidney and Thigh Support
Leatherette High-Wear Patches
Installation: Requires Corbeau custom seat brackets to fit correctly.
The CR1 is designed to fit up to a 34-36 inch waist. (Extra tight in kidney area)
The Wide CR1 is designed to fit up to a 40 inch waist. (Extra tight in kidney area
High-Density Injection-Molded Foam
Ergonomically Design
Harness Belt Capability
Integrated Shoulder, Kidney and Thigh Support
Leatherette High-Wear Patches
Installation: Requires Corbeau custom seat brackets to fit correctly.
The CR1 is designed to fit up to a 34-36 inch waist. (Extra tight in kidney area)
The Wide CR1 is designed to fit up to a 40 inch waist. (Extra tight in kidney area
They also have the inflatable lumbar support in both seats.
They come with the brackets that will work in a 3rd or 4th generation Fbody and 4 point Corbeau harnesses with a quick release buckle. These were in a 3rd gen car before I got them and I only tried them in my GTA but as most of you know, 3rd and 4th generation seats are interchangeable (I had/have 97 Z28 seats in my GTA) so these can be used in either model Fbody.
New, these seats list anywhere from $840-1050 for just the pair of seats. The brackets ($60x2), harnesses ($70x2), and inflatable lumbar support ($50x2) options would bring the total to well over $1200.
Here is a picture of what they look like:
Here is what the harnesses look like:
Pricing:
------------------------------------------------------
I paid $800 plus shipping for the seats this winter and, taking into account the nick in the passenger seat and I need them gone like NOW, I want $700 for everything! If you have a Stang I will take $30 off for the Fbody brackets and sell them seperately. I will entertain reasonable offers/trades...
Comment