WANTED: 1979-93 Front control arms. OEM FORD.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • UFoMoCo
    TCS Regular
    • Mar 2013
    • 184

    WANTED: 1979-93 Front control arms. OEM FORD.

    Hello,
    I'm looking for some OEM Ford 1979-93 front control arms. Must have the original control arm bushings. However, the ball joints are of no concern as they will be replaced.


    Thank you.
  • 95Electricblue
    TCS Regular
    • Sep 2003
    • 439

    #2
    79 to 86 are not the same as 87 to 93
    Troy
    95 Mustang GT
    13.08 1/4
    1.8 60 ft

    Comment

    • UFoMoCo
      TCS Regular
      • Mar 2013
      • 184

      #3
      Originally posted by 95Electricblue View Post
      79 to 86 are not the same as 87 to 93
      I was under the impression that the only difference between them was a different ball joint. At least that's why I've read. Care to elaborate?

      Comment

      • UFoMoCo
        TCS Regular
        • Mar 2013
        • 184

        #4
        Well 1987-93 would be preferred!

        Comment

        • mat50ho
          TCS Regular
          • Aug 2007
          • 68

          #5
          I have a set of the fordracing ones there are used. PM if intrested
          89 coupe a work in progress

          Comment

          • UFoMoCo
            TCS Regular
            • Mar 2013
            • 184

            #6
            Originally posted by mat50ho View Post
            I have a set of the fordracing ones there are used. PM if intrested
            Thanks for the offer. However, FRPP arms are different I believe. Just looking for stock OEM untouched front a-arms.


            Thanks.

            Comment

            • xjfish
              siiiiiiick!
              • Jul 2006
              • 7357

              #7
              Control arm bushings for these a cheap and readily available (OEM rubber and aftermarket polyurethane), just an fyi. Junkyards should have plenty of these.
              1987 Oldsmobile Cutlass Ciera

              Comment

              • UFoMoCo
                TCS Regular
                • Mar 2013
                • 184

                #8
                Originally posted by xjfish View Post
                Control arm bushings for these a cheap and readily available (OEM rubber and aftermarket polyurethane), just an fyi. Junkyards should have plenty of these.
                I know. But for what i am doing I need original OEM bushings installed.

                Comment

                • UFoMoCo
                  TCS Regular
                  • Mar 2013
                  • 184

                  #9
                  Still looking!

                  Comment

                  • UFoMoCo
                    TCS Regular
                    • Mar 2013
                    • 184

                    #10
                    Bump.

                    Comment

                    • straydog
                      TCS n00b
                      • Oct 2010
                      • 15

                      #11
                      i have a pair off of an '88. pm if interested

                      Comment

                      • UFoMoCo
                        TCS Regular
                        • Mar 2013
                        • 184

                        #12
                        Originally posted by straydog View Post
                        i have a pair off of an '88. pm if interested
                        Pm sent.

                        Comment

                        Working...
                        X
                        😀
                        😂
                        🥰
                        😘
                        🤢
                        😎
                        😞
                        😡
                        👍
                        👎