84 hatchback roller / part out

[AdamZ82]

Fuck me in the goat ass.

How much for the carpet?

I paid $130 for it, already cut it to fit around the cage and seats, etc.

If the roller doesn't sell I'll sell it for $90

[20thCenturyFox]

if you start parting it what do you want for the rear end?

[OhMannClint]

This could be parted for profit. I just dont have the room.

[Turbohwagon]

if you start parting it what do you want for the rear end?

This.

[AdamZ82]

if you start parting it what do you want for the rear end?

$2000 and it comes with a bunch of other shit

I know I could start stripping the wheels/rear end/fuel system out of the car and selling them seperate, but that leaves me with a shell of a car that I can't move and I don't want to be in that situation.

There's definately money to be made if someone wants to take on the task of parting this out, and if someone wants to buy the whole package I'm willing to come down a little more on price. I just want the garage space back.

If I have to start stripping the roller down, prices will be fair but I would be less willing to negotiate because I'm still stuck with the car. If you want to make the easy bucks parting this out, you'll have to take the whole thing shoot me some offers...

[AdamZ82]

Bump with lower prices on roller and complete package. Buy my product

[Sleepin96]

I'd be interested in the shell if you part it. Also all wheels and tires.

[AdamZ82]

I'd be interested in the shell if you part it. Also all wheels and tires.

What exactly are you interested in?
Wheels/tires, interior parts/seats, rear end, hood, fuel system, front suspension, driveshaft, transmission, driveshaft loop, etc.

List off what you want and shoot me an offer. Or you could buy the whole thing and make some money parting it out... I would even hand over the rights to this thread

[Sleepin96]

What exactly are you interested in?
Wheels/tires, interior parts/seats, rear end, hood, fuel system, front suspension, driveshaft, transmission, driveshaft loop, etc.

List off what you want and shoot me an offer. Or you could buy the whole thing and make some money parting it out... I would even hand over the rights to this thread

Oh how nice of you. I'll put a list together, i have a friend with a vert that is destroyed, he just needs a shell. I'll talk it over with him tonight. The wheels are for me.

[Notch]

Any word on the K member yet?

Also, what does one need to bolt those brakes up to their car? Are they for SN95 spindles, or fox spindles, or doe they come with spindles?

[AdamZ82]

Any word on the K member yet?

Also, what does one need to bolt those brakes up to their car? Are they for SN95 spindles, or fox spindles, or doe they come with spindles?

I haven't heard anything yet, so if you want it swing on over.

Comes with SN95 spindles, calipers, rotors, brand new set of hawk pads and o-ring kit for the calipers.

[Notch]

Damn thats tempting I'll let a know what all I want a little later.

[Turbohwagon]

Still very interested in the rear axle.

[AdamZ82]

Still very interested in the rear axle.

A couple people have expressed interest so far, but there's also a couple offers on the roller that I'm contemplating. At this point I don't see myself parting it out... if you want the axle/wheels/other goodies you'd have to take the whole thing. Shoot me an offer if you're interested

[Hatch]

[QUOTE=AdamZ82;2462560]84 hatchback roller. Clean title, good glass, most if not all interior panels (don't have factory dash or center console, but all major panels should be there)
World class T-5, shifts great
31-spline 8.8 rear with 3.73 gears and 03 cobra dif, less than 1000 miles and no track passes
Sumped stock fuel tank, Mallory pump & pressure regulator (carb), aeroquip fuel lines/fittings
Grant quick-release steering wheel
5-pt harnesses, passenger side definately expired, driver side might be expired
white fiberglass hood w/ pins, not sure which company
Weld pro-stars, 5-lug, 15x10.5 ET streets, 15x4 somethings on the front, plenty of life in all tires
8pt roll bar, was in the car when I got it, welds aren't the best
aluminum driveshaft
upper & lower control arms, don't recall the brand but they're red and plenty strong
Jaz poly bucket seats w/ covers & aluminum sliding seat brackets
brand new replacement carpet, black
aluminum battery box mounted in spare tire well (and Napa battery, couple years old)
nitrous bottle brackets mounted over passenger side of rear axle
lakewood 50/50 rear drag shocks
MSD ignition coil
wired for 3G alternator tied into kill switch
fuse block on firewall, couple relays on firewall for fan, fuel pump, etc.
kill switch mounted behind rear license plate
subframe connectors
driveshaft loop
SN95 front brake setup w/ hubs & new rotors (not installed- currently has some other 5-lug setup)
exhaust dumps in front of rear axle
Probably more that I can't think of at the moment.
$1800


chromoly K-member/a-arms $350
aerospace front brakes $500
Lakewood 90/10s $150
Extra tilt steering column w/ key (unsure of year, no wheel) $10
Aeromotive fuel injected fuel pressure regulator $100

Everything listed above $2200

Everything located in Blaine, need trailer to pick up car. Delivery could be arranged for additional cost (need payment up front). First one with cash wins unless otherwise stated.

Flaming River manual rack kit (includes steering shaft & tie rod ends) $150 SOLD
04? style Fiberglass dash, trimmed to fit 84 hatch car, comes with dzus fasteners to mount. No holes for gauges yet $200 Sold