Still Available:
World class T-5, shifts great $400
Jaz poly bucket seats w/ covers & aluminum sliding seat brackets $200
UPR chromoly K-member/A-arms $350
Aerospace front brakes (includes calipers, rotors, spindles, brand new set of hawk pads, and o-ring kit for the calipers)$500
Lakewood 90/10s, brand new in box $150
Aeromotive fuel injected fuel pressure regulator $100
Taurus Fan $20
Everything located in Blaine. First one with cash wins unless otherwise stated.









84 hatchback roller. Clean title, good glass, most if not all interior panels (don't have factory dash or center console, but all major panels should be there)
31-spline 8.8 rear with 3.73 gears and 03 cobra dif, less than 1000 miles and no track passes
Sumped stock fuel tank, Mallory pump & pressure regulator (carb), aeroquip fuel lines/fittings
Grant quick-release steering wheel
5-pt harnesses, passenger side definately expired, driver side might be expired
white fiberglass hood w/ pins, not sure which company
Weld pro-stars, 5-lug, 15x10.5 ET streets, 15x4 somethings on the front, plenty of life in all tires
8pt roll bar, was in the car when I got it, welds aren't the best
aluminum driveshaft
upper & lower control arms, don't recall the brand but they're red and plenty strong
brand new replacement carpet, black
aluminum battery box mounted in spare tire well (and Napa battery, couple years old)
nitrous bottle brackets mounted over passenger side of rear axle
lakewood 50/50 rear drag shocks
MSD ignition coil
wired for 3G alternator tied into kill switch
fuse block on firewall, couple relays on firewall for fan, fuel pump, etc.
kill switch mounted behind rear license plate
subframe connectors
driveshaft loop
SN95 front brake setup w/ hubs & new rotors (not installed- currently has some other 5-lug setup)
exhaust dumps in front of rear axle
Probably more that I can't think of at the moment.
Sold
Flaming River manual rack kit (includes steering shaft & tie rod ends) $150 Sold
04? style Fiberglass dash, trimmed to fit 84 hatch car, comes with dzus fasteners to mount. No holes for gauges yet $200 Sold



World class T-5, shifts great $400
Jaz poly bucket seats w/ covers & aluminum sliding seat brackets $200
UPR chromoly K-member/A-arms $350
Aerospace front brakes (includes calipers, rotors, spindles, brand new set of hawk pads, and o-ring kit for the calipers)$500
Lakewood 90/10s, brand new in box $150
Aeromotive fuel injected fuel pressure regulator $100
Taurus Fan $20
Everything located in Blaine. First one with cash wins unless otherwise stated.









84 hatchback roller. Clean title, good glass, most if not all interior panels (don't have factory dash or center console, but all major panels should be there)
31-spline 8.8 rear with 3.73 gears and 03 cobra dif, less than 1000 miles and no track passes
Sumped stock fuel tank, Mallory pump & pressure regulator (carb), aeroquip fuel lines/fittings
Grant quick-release steering wheel
5-pt harnesses, passenger side definately expired, driver side might be expired
white fiberglass hood w/ pins, not sure which company
Weld pro-stars, 5-lug, 15x10.5 ET streets, 15x4 somethings on the front, plenty of life in all tires
8pt roll bar, was in the car when I got it, welds aren't the best
aluminum driveshaft
upper & lower control arms, don't recall the brand but they're red and plenty strong
brand new replacement carpet, black
aluminum battery box mounted in spare tire well (and Napa battery, couple years old)
nitrous bottle brackets mounted over passenger side of rear axle
lakewood 50/50 rear drag shocks
MSD ignition coil
wired for 3G alternator tied into kill switch
fuse block on firewall, couple relays on firewall for fan, fuel pump, etc.
kill switch mounted behind rear license plate
subframe connectors
driveshaft loop
SN95 front brake setup w/ hubs & new rotors (not installed- currently has some other 5-lug setup)
exhaust dumps in front of rear axle
Probably more that I can't think of at the moment.
Sold
Flaming River manual rack kit (includes steering shaft & tie rod ends) $150 Sold
04? style Fiberglass dash, trimmed to fit 84 hatch car, comes with dzus fasteners to mount. No holes for gauges yet $200 Sold






















Comment