5.0 motor

[5.0stang85]

Needs full rebuild it's ugly.. $50 or $250 with my ported E7's and carb Edelbrock intake OR I scrape the short block along with a SHIT load of other stuff I have waiting to do so... willing to separate anything

the good:
good block that was zero decked, had amazing oil pressures, and still STD bore
usable pistons/ rods/ crank(87 block/ 94 rotating assembly)
comes with your choice stock HO roller or 351w stock roller cam
good roller lifters- nothing else (dog bones and spider not included)
good stock roller push rods (used)
usable timing chain (true double roller)
comes with a BUNCH of 5.0L hardware(bolts)
extra set of 5.0L main bolts


the bad:
block has a broken ear off the driver side bottom bell housing bolt still usable though (I used it this way and was gonna have a friends dad weld it up with high nickle rod and drill and tap it)
crank/ rods/ pistons need cleaning/ grinding to use
needs line bore done for the 94 crank
for now it is pieced together for easier transport...
missing 2 head bolts
missing 2 EFI upper intake bolts


not included/don't have:
lifter dog bones/ spider
timing gears
timing cover
oil pan
oil pump
balancer
water pump
flywheel

zac_fick@yahoo.com

[taank]

Scrap it dude.

[TwistedMetal]

Scrap it dude.

this, find some other random junk and take it to the scrapper, you might even get more than your asking.

[5.0stang85]

probably will with the SN95 doors, and other random crap I find here

I was just throwing it out there so I wouldn't have to load it for the move if I don't have to...

[taank]

Nobody is boing to want a motor with a busted ear.