aluminum heads

[TTSTANG]

edelbrock performer rpm heads with about 300 miles on them, also included are some crane 1.6 roller rockers, the heads are $539 a peice new and the rockers are $195 new so thats about $1300 after shipping and such.

i'll let everything go for $950

here are the specs for the heads:

Bolt-on power, right out of the box.

Cylinder Heads, Aluminum, Natural, 60cc, Ford, Small Block, Windsor, Each

All Edelbrock aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability, plus hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. They offer improved power throughout the rpm range for greater throttle response and top-end horsepower. The intake and exhaust runners are CNC-machine profiled for superior flow and performance. Performer RPM heads are fully assembled with stainless steel intake and exhaust valves with undercut stems, 2-ring positive oil control seals, rocker studs, hardened steel guideplates, valve springs, retainers, and keepers.

Vendor Edelbrock
Product Line Edelbrock Performer/Performer RPM Street Cylinder Heads
Cylinder Head Style Assembled
Cylinder Head Material Aluminum
Cylinder Head Finish Natural
Combustion Chamber Volume (cc) 60
CNC Machined Combustion Chamber No
Intake Runner Volume (cc) 170
Exhaust Runner Volume (cc) 60
CNC Machined Intake Runner No
CNC Machined Exhaust Runner No
Combustion Chamber Style (Not Specified)
Intake Port Shape (Not Specified)
Intake Port Location Standard
Exhaust Port Shape Rectangular
Exhaust Port Location Standard
Spark Plug Style (Not Specified)
Intake Valves Included Yes
Intake Valve Diameter (in) 2.020
Intake Valve Diameter (mm) (Not Specified)
Exhaust Valves Included Yes
Exhaust Valve Diameter (in) 1.600
Exhaust Valve Diameter (mm) (Not Specified)
Valve Springs Included Yes
Outside Diameter Of Outer Spring (in) 1.450
Damper Spring Included No
Number Of Springs Per Valve Single
Retainers Included Yes
Retainer Material Steel
Locks Included Yes
Lock Style 7 degree
Valve Stem Seals Included Yes
Valve Stem Seal Style PC seal
Rocker Arm Studs Included Yes
Rocker Arm Nut Thread Size 3/8-24 in.
Rocker Arms Included No
Rocker Arm Nuts Included No
Guideplates Included Yes
Guideplate Pushrod Size 5/16 in.
Valve Cover Mounting Style (Not Specified)
Accessory Bolt Holes Drilled Yes
Intake Valve Angle (Not Specified)
Exhaust Valve Angle (Not Specified)
Valve Guides Included Yes
Valve Guide Material Manganese bronze
Valve Seats Machined Yes
Valve Seat Machine Style 3-angle
Valve Seat Material Ductile iron
Steam Holes Drilled No
Oiling Style Through pushrod
Machined For O Ring No
Heat Crossover No




thanks

[10k lakes]

If these would have been on here a month ago I would have bought them but now the motor is back together and the money is gone.

[TTSTANG]

If these would have been on here a month ago I would have bought them but now the motor is back together and the money is gone.

sux, yea they were just sitting in my garage a month ago too!

ohwell

[Mike Neal!]

pm sent. are ya interested?

[TTSTANG]

Bump

[89rat]

Do you still have the heads, if so will you take less like $750?

[lilstang5O]

$500 hundo ?? How long were they used and abused??

[TTSTANG]

Do you still have the heads, if so will you take less like $750?

$750 and they are yours

[allstock93gt]

do you still have the rockers? pm me with details!