WTB garage stuff and lawn stuff

[Silversixspeed]

Just moved into a new place and found myself wanting/needing some stuff. Have cash in hand for the following items:

Weed trimmer (preferably gas powered)
Floor jack (preferably a bigger/better one, not a cheap portable style)
Jack stands (anybody just get rid of their turbo project?)
Air compressor (220v ok, but don't need anything huge)
1/2" Impact

I may add more as I think of stuff

[taank]

For the jack. The harbor freight heavy duty one with steel wheels is a nice piece. That's one of the few tools I would ever get at harbor freight

[Scorpner]

I think this is the jack I have: http://www.sears.com/craftsman-4-ton...6000P?prdNo=15

I also have a 110v compressor I got from my neighbor. It's an old Wards 1 1/2 hp, but the tank is rusty on the outside.

[Silversixspeed]

Added 1/2" Impact to the list, both of mine are crap.

[95.0mark]

I have a hf jack. Works as it should. I also have a lot of hf tools. None have broke. I just used my hf angle grinder with hf cut off wheel to cut a bunch of drill rod for bending. Of course for safety I used a pair of hf safety googles and a hf face shield. I also had a pair of hf leather gloves on. I wrapped the steel up in hf rubber bands too.

I have HF rubber gloves too. Blue nitrile. Xl 100 for 6 bucks.
I have much more and all works just fine when I need it. I'm not a tool snob like some.
My four jack stands are from Walmart though. Hold up my cars fine. I have ramps from fleet farm. Those work fine too.

I'm done typing now

[taank]

For the value the harbor freight jack has performed above my expectations. Daily use in a moderately busy shop for going on 3 years is good enough. The rest of their shit is junk. Tarted a air saw. Lasted for 3 cuts. Absolute junk

[budderigs]

I was looking around and I have two extra weedeaters one needs a little work the other works well.

[SVT5LITER]

I have an aluminum fixer upper 2-ton (I believe) floor jack... may need fluid?? It doesn't quite hold when up with a load on it.. very slowly lets the vehicle back down. Make offer if interested!

I also have a lot of hf tools. None have broke.
I wrapped the steel up in hf rubber bands too.

About every other time I'm there, there's an unhappy person there returning a junk tool.

I have HF rubber gloves too. Blue nitrile. Xl 100 for 6 bucks.

Medium-duty for Nancy hands. However the thicker black gloves work pretty well.

[Silversixspeed]

Bought a Snap On jack (2.5 ton) and 4 blue point jack stands (6 ton) for $150
Thanks for the responses guys!