One of a kind mini bike

[mark_eych]

I had too much time on my hands when I did this. It did run and work. Tires, brakes, sprockets, chains, and bearings are new. I would like to keep the engine since I stole it off lawn equipment. I need the bike seat too but probably have some thing. It worked fine but needed some love to get the throttle and braking better. With the jack shaft it only goes about 15 or so but that is fast enough unless you are planning a dumb ass video. You will have the only one in the pits. I would like $50 but am open to all offers.

[TwistedMetal]

Nice pit bike, if I was still in the cites I would be on my way to get it right now, GLWtS.

[Iroc-Z]

Where are you located?

[mark_eych]

Where are you located?

Arden Hills

[SVT5LITER]

How much for the maroon pit bike next to it?

[mark_eych]

How much for the maroon pit bike next to it?

I took a bit of a risk when I bought that at the end of the summer. Some parts were missing and the tank, covers, muffler, spark plugs, and one carb were removed. It ran great though according to the seller. It makes one wonder if it ran so well why did it get taken apart? I put a gauge on and cranked it and oil pressure was good and no bad noises. Put enough parts on to run it and and it fired right up. Needs carbs cleaned and some TLC. I think I now have all the parts I need to make it complete. If you need a winter project I may let it go for about $800. You spend more than that on a good hub cap.

[ef5]

pm sent

[SVT5LITER]

I took a bit of a risk when I bought that at the end of the summer. Some parts were missing and the tank, covers, muffler, spark plugs, and one carb were removed. It ran great though according to the seller. It makes one wonder if it ran so well why did it get taken apart? I put a gauge on and cranked it and oil pressure was good and no bad noises. Put enough parts on to run it and and it fired right up. Needs carbs cleaned and some TLC. I think I now have all the parts I need to make it complete. If you need a winter project I may let it go for about $800. You spend more than that on a good hub cap.

Must be Caddy hubcaps? The size I need is actually more the tarnished lil' guy w/gas pipe end caps on it there.
I have old school Rupp with suspension & lights taste, and a no frills home-made jobber budget