Tweet
-E7 heads. Recently gone thru. Extremely clean and ready to go. Comes with stock rockers $75
-D&D Main girdle with ARP hardware $125
-TFS Valve springs were in the street heat heads with .540 max lift $35
-TFS pushrods 6.650 long $35
-19lb injectors (8) 1 is missing the plactic end cap and o-ring $15
-Stock flywheel. Needs resurfacing $20
-Fan shroud $30
-NEW Ackerly & Childs STD. ring set (1/16, 1/16, 3mm LT) $75
-NEW (std. size)speed pro crank bearing set. Jegs #844-C129M & speed pro rod bearings Jeg# 844-C8-7160CH $100
-Used, forged, stock bore Manley Pistons (7) & 1 New stock bore Probe piston, with .927 wristpins for 327 stroker. Relief cut to accept TFS twisted wedge heads and stand heads. Probe piston will need to be weight matched to the Manley's to make a complete set. Rings listed above are for these pistons. $150
I took pics of everything and I'll post them up as needed.
All parts listed are from my 89 mustang and prices are negotiable. 763-370-4464
Terry
-D&D Main girdle with ARP hardware $125
-TFS Valve springs were in the street heat heads with .540 max lift $35
-TFS pushrods 6.650 long $35
-19lb injectors (8) 1 is missing the plactic end cap and o-ring $15
-Stock flywheel. Needs resurfacing $20
-Fan shroud $30
-NEW Ackerly & Childs STD. ring set (1/16, 1/16, 3mm LT) $75
-NEW (std. size)speed pro crank bearing set. Jegs #844-C129M & speed pro rod bearings Jeg# 844-C8-7160CH $100
-Used, forged, stock bore Manley Pistons (7) & 1 New stock bore Probe piston, with .927 wristpins for 327 stroker. Relief cut to accept TFS twisted wedge heads and stand heads. Probe piston will need to be weight matched to the Manley's to make a complete set. Rings listed above are for these pistons. $150
I took pics of everything and I'll post them up as needed.
All parts listed are from my 89 mustang and prices are negotiable. 763-370-4464
Terry
Comment