I have a white top that I cannot get clean. The top is only 3 years old but has greyish areas and dirty spots that I can't get clean. I've tried Tide and Oxy Clean with a good bristle brush. Does anyone have any type of trick for whitening it back up again??
Cleaning White Convert Top
Collapse
X
-
I just did mine, I have given everything a try. The best ting I have found is a water base wax and grease remover from 3M I will try to get the part # for you I have a can at home. It is the only shit I used where you could tell the difference.
Comment
-
-
thats what we use and it works great.Originally posted by OffShore View PostWesleys bleach white, Ive used it on white wall tires w great success.
otherwise the water based paint cleaners work good also but do cost abit moreBighley Auto Body
www.bighleyautobody.com
mike@bighleyautobody.com
Dukes race shop
Norm's Tire Sales
Transport Graphics
Aarons Precision Machine
Comment
-
-
I use Orange Go Jo with added aloe vera to put back some moisture.........
No bullshit - It works great on vinyl .. I use that & a tooth brush for doing my Impala seats cracks , ect ...........351W into Fox needed:
7qt oil pan , Billet Dizzy/Ignition , 1 7/8'' headers for TFS R heads , adjustable Tubular rear suspension & parts , Roll cage , 8+ gallon fuel cel / lines, ect..
TFS R heads off of 420ci engine
Comment
-
-
Followed by mineral oil.Originally posted by OffShore View PostWesleys bleach white, Ive used it on white wall tires w great success.
= when I was detailing. Put the mineral oil on a rag or use a spray bottle. Coat the shit out of it, Then wipe the excess. It will collect dirt like you tires do after shining but a hot pressure washer usually takes car of it.
Make sure you get it real clean before the oil or you will seal the dirt in.
(BTW: MINERAL SPIRITS IS NOT MINERAL OIL.) Just to make sure you don't do it wrong.
Comment
-

MN foxbody Procharger MAFIA! (2of2)


it works REALLY good 

Comment